|
GNU Radio's TEST Package
|
#include <uhd_source_c.h>

Static Public Member Functions | |
| static std::vector< std::string > | get_devices () |
Friends | |
| uhd_source_c_sptr | make_uhd_source_c (const std::string &args) |
| uhd_source_c::~uhd_source_c | ( | ) |
|
virtual |
Get the actual underlying radio hardware antenna setting.
| chan | the channel index 0 to N-1 |
Implements source_iface.
|
virtual |
Get the available antennas of the underlying radio hardware.
| chan | the channel index 0 to N-1 |
Implements source_iface.
Get the actual bandpass filter setting on the radio frontend.
| chan | the channel index 0 to N-1 |
Reimplemented from source_iface.
|
virtual |
Get the possible bandpass filter settings on the radio frontend.
| chan | the channel index 0 to N-1 |
Reimplemented from source_iface.
Get the center frequency the underlying radio hardware is tuned to. This is the actual frequency and may differ from the frequency set.
| chan | the channel index 0 to N-1 |
Implements source_iface.
Get the master clock rate.
| mboard | the motherboard index 0 to M-1 |
Reimplemented from source_iface.
Get the currently set clock source.
| mboard | which motherboard to get the config |
Reimplemented from source_iface.
Get a list of possible clock sources.
| mboard | which motherboard to get the list |
Reimplemented from source_iface.
|
static |
Get the frequency correction value.
| chan | the channel index 0 to N-1 |
Implements source_iface.
|
virtual |
Get the tunable frequency range for the underlying radio hardware.
| chan | the channel index 0 to N-1 |
Implements source_iface.
Get the actual gain setting of a named stage.
| name | the name of the gain stage |
| chan | the channel index 0 to N-1 |
Implements source_iface.
Get the actual gain setting of the underlying radio hardware.
| chan | the channel index 0 to N-1 |
Implements source_iface.
|
virtual |
Get the gain stage names of the underlying radio hardware.
| chan | the channel index 0 to N-1 |
Implements source_iface.
|
virtual |
Get the settable gain range for a specific gain stage.
| name | the name of the gain stage |
| chan | the channel index 0 to N-1 |
Implements source_iface.
|
virtual |
Get the settable overall gain range for the underlying radio hardware.
| chan | the channel index 0 to N-1 |
Implements source_iface.
Get the number of channels the underlying radio hardware offers.
Implements source_iface.
Get the sample rate for the underlying radio hardware. This is the actual sample rate and may differ from the rate set.
Implements source_iface.
|
virtual |
Get the possible sample rates for the underlying radio hardware.
Implements source_iface.
| ::osmosdr::time_spec_t uhd_source_c::get_time_last_pps | ( | size_t | mboard = 0 | ) |
| ::osmosdr::time_spec_t uhd_source_c::get_time_now | ( | size_t | mboard = 0 | ) |
Get the currently set time source.
| mboard | which motherboard to get the config |
Reimplemented from source_iface.
Get a list of possible time sources.
| mboard | which motherboard to get the list |
Reimplemented from source_iface.
| std::string uhd_source_c::name | ( | ) |
Select the active antenna of the underlying radio hardware.
| antenna | the antenna name |
| chan | the channel index 0 to N-1 |
Implements source_iface.
Set the bandpass filter on the radio frontend.
| bandwidth | the filter bandwidth in Hz, set to 0 for automatic selection |
| chan | the channel index 0 to N-1 |
Reimplemented from source_iface.
Tune the underlying radio hardware to the desired center frequency. This also will select the appropriate RF bandpass.
| freq | the desired frequency in Hz |
| chan | the channel index 0 to N-1 |
Implements source_iface.
Set the master clock rate.
| rate | the new rate in Hz |
| mboard | the motherboard index 0 to M-1 |
Reimplemented from source_iface.
Set the clock source for the device. This sets the source for a 10 Mhz reference clock. Typical options for source: internal, external, MIMO.
| source | a string representing the clock source |
| mboard | which motherboard to set the config |
Reimplemented from source_iface.
Set a constant DC offset value. The value is complex to control both I and Q. Only set this when automatic correction is disabled.
| offset | the dc offset (1.0 is full-scale) |
| chan | the channel index 0 to N-1 |
Reimplemented from source_iface.
Set the RX frontend DC correction mode. The automatic correction subtracts out the long-run average.
When disabled, the averaging option operation is reset. Once in Manual mode, the average value will be held constant until the user re-enables the automatic correction or overrides the value by manually setting the offset.
| mode | dc offset correction mode: 0 = Off, 1 = Manual, 2 = Automatic |
| chan | the channel index 0 to N-1 |
Reimplemented from source_iface.
Set the frequency correction value in parts per million.
| ppm | the desired correction value in parts per million |
| chan | the channel index 0 to N-1 |
Implements source_iface.
Set the named gain on the underlying radio hardware.
| gain | the gain in dB |
| name | the name of the gain stage |
| chan | the channel index 0 to N-1 |
Implements source_iface.
Set the gain for the underlying radio hardware. This function will automatically distribute the desired gain value over available gain stages in an appropriate way and return the actual value.
| gain | the gain in dB |
| chan | the channel index 0 to N-1 |
Implements source_iface.
|
virtual |
Set the RX frontend IQ balance correction. Use this to adjust the magnitude and phase of I and Q.
| balance | the complex correction value |
| chan | the channel index 0 to N-1 |
Reimplemented from source_iface.
Set the RX frontend IQ balance mode.
| mode | iq balance correction mode: 0 = Off, 1 = Manual, 2 = Automatic |
| chan | the channel index 0 to N-1 |
Reimplemented from source_iface.
Set the sample rate for the underlying radio hardware. This also will select the appropriate IF bandpass, if applicable.
| rate | a new rate in Sps |
Implements source_iface.
|
virtual |
Set the time registers at the next pps.
| time_spec | the new time |
Reimplemented from source_iface.
|
virtual |
Sets the time registers immediately.
| time_spec | the new time |
| mboard | the motherboard index 0 to M-1 |
Reimplemented from source_iface.
Set the time source for the device. This sets the method of time synchronization, typically a pulse per second or an encoded time. Typical options for source: external, MIMO.
| source | a string representing the time source |
| mboard | which motherboard to set the config |
Reimplemented from source_iface.
|
virtual |
Sync the time registers with an unknown pps edge.
| time_spec | the new time |
Reimplemented from source_iface.
|
friend |